The Smooth-On EpoxAmite 100 Laminating System is a game-changing solution for a wide range of fabrication applications. This easy-to-use, two-part epoxy system is formulated to provide exceptional physical and performance properties, making it an ideal choice for professionals and hobbyists alike.

One of the key benefits of the EpoxAmite 100 Laminating System is its versatility. It can be used with a variety of reinforcements, including S-Glass, E-Glass, Kevlar, and Carbon fibers, making it suitable for a broad range of lay-up applications and composite parts. Additionally, the epoxy resin can be mixed with fillers such as fumed silica for gel coat applications, and with Urefil 3, Urefil 7, and other fillers for fairing, filleting, or bonding applications.

The EpoxAmite 100 Laminating System boasts a number of advantages that make it a top choice for fabricators. The convenient mix ratios, easy-to-use formula, and low viscosity make it simple to mix and apply, even for those without extensive experience. The system also exhibits excellent moisture resistance and is non-blush, making it suitable for use in a variety of environments.

To ensure successful application, it's essential to follow the recommended preparation and mixing procedures. Be sure to work in a well-ventilated area, wear protective gear, and use a NIOSH-approved respirator. Mixing containers should have straight sides and a flat bottom, and mixing sticks should be flat and stiff with defined edges to ensure thorough mixing.

The EpoxAmite 100 Laminating System can be colored with UVO or IGNITE colorants, and adding fillers such as dry fillers or Epic Epoxy Thinner can enhance its properties. To ensure maximum strength and performance, it's crucial to accurately measure and mix the epoxy resin and hardener according to the recommended ratio.

When applying the EpoxAmite 100 Laminating System, it's essential to work quickly and apply multiple thin layers, allowing each layer to cure before applying the next. This will help prevent air bubbles and ensure a strong, durable bond.

Curing times will vary depending on the mass of the application, but the EpoxAmite 100 Laminating System can be heat-cured to reduce cure times and achieve higher heat deflection temperatures. Once cured, the epoxy can be sanded, machined, drilled, tapped, or painted, making it an extremely versatile material for fabrication applications.

Overall, the Smooth-On EpoxAmite 100 Laminating System is a highly reliable and versatile epoxy system that's well-suited for a broad range of applications. Its easy-to-use formula, excellent performance properties, and versatility make it an ideal choice for professionals and hobbyists alike.